Are you looking for a method that allows you to root Samsung Galaxy S22? If yes, you have arrived at the right place that gives you a simple step-by-step guide!
In this post, we have elucidated all the essential software and standalone applications to root Galaxy S22, so make sure to read the guide till the end.
As we all know, rooting an android phone is a long process that requires several steps, and here you will get four different ways to root Samsung Galaxy S22.
Once you have unlocked the system settings doors, you can achieve various powerful things in your device without a hassle and enjoy customization.
Besides this, you don’t need permission to enter into the system files because you have the power to access those files with the superuser features directly.
However, you have to make up your mind since rooting any device comes with some risk. Therefore, let’s understand the whole picture by first learning about root!
Table of Contents
What is Root?
The root is the system directory that holds the entrance to the stored system, users, and app data, and those files are accessible through the administer privileges.
Those admin settings are unlocked and attainable if you have opened the bootloader, but the makers usually close the door to access those fascinating features.
So, let’s look at the different methods to root Samsung Galaxy S22. But before that, complete the pre-requirement to avoid the potential downfalls of rooting!
Pre-requirements
- Ensure the phone is fuel more than 80% for the rooting process.
- Take complete data backup on the flash storage or other device.
- Pick the ADB/Fastboot drivers to run the command prompt.
- Ensure that you have installed the Samsung USB drivers on the PC.
- Download the Samsung Galaxy S22 stock firmware file.
- Get the latest version of the Magisk zip file.
- Grab the Odin Flash tool software kit.
Note: All upcoming methods won’t work unless the bootloader is unlocked. Check this guide if you don’t know how to unlock the bootloader of the Samsung Galaxy S22.
Disclaimer: RootinGo is not accountable for the damage. Run the methods at your own risk. Follow the guide precisely to avoid problems like bootloop and brick.
1. Root Samsung Galaxy S22 Using Magisk
- Download the Samsung Galaxy S22 firmware file
- Extract the firmware file on the PC via 7zip or Winrar
- Enter in the extracted folder and transfer the AP file to the phone
- Make sure to put the AP file in the internal storage
- Download and install the latest magisk application
- Run the app and tap on the magisk install section.
- Next, you have to tap on the Select and Patch a File
- Head toward the AP file location in the internal storage.
- Tap on the AP to start the patching process first
- The magisk_patched.tar replace the file, transfer it to PC
- Now, Turn OFF the phone to begin the second part
Flash Patched Boot File Using Odin Flash Tool
- Open the recently installed Odin Flash tool software
- Tap on the AP section and enter the magisk_patched.tar file
- Put Galaxy S22 in Download mode by pressing Power Down and Power key.
- Now, connect the device with a USB cable and other ends to the computer
- Following that, the device appears on the Odin Flash tool screen
- Tap on the start button to initialize the flashing process of the magisk file.
- It takes a few minutes to complete, and a Pass icon will appear
- You have rooted the Samsung Galaxy S22 and reboot to enjoy the fun
2. Root Samsung Galaxy S22 Using SuperSU
- For this method, you need TWRP custom recovery flashed on the phone
- If you already have, there’s no problem. If not, it’s the right time to do it.
- Install the latest version of the SuperSU zip for your smartphone
- Go to the Settings app→Security→ enable Unknown Source option
- Boot into the custom recovery mode and tap on the Install section
- Reach to the SuperSU zip location and tap to start flashing
- Lastly, swipe right to begin the flashing procedure, finally
- Once the process end, reboot the device and enjoy rooting traits
3. Using KingRoot Application
- If you desire to root phone without a PC, install the KingRoot Application.
- Head toward the Settings→Security→enables Unknown source choice.
- Enter in the KingRoot app, click on the One Click Root button.
- Don’t panic, as the phone will perform several booting processes.
- Once everything ends, you have root Samsung Galaxy S22.
4. Root device by OneClickRoot Software with PC
- Download and install the OneClickRoot software on the computer.
- Connect the device with the PC using an original USB data cable.
- Run the OneClickRoot, and click on the root Now button to start.
- Once the overall process ends after a few minutes, enjoy rooting.
Pros
You can achieve different things once you have opened the portal of rooting. You can build a customized interface, add new performance attributes1`, and expand battery life.
On the other hand, you also attain the power to modify the system settings from which you can easily remove annoying bloatware and enter it into the admin traits.
Cons
Rooting any device comes with some flaws, too, as you won’t be able to receive the warranty privileges if the phone is somehow damaged due to a violation of policies.
Yet, heating issues can also happen if you flash incompatible ROM in the interface, while malware and virus may cross the firewall protection.
Conclusions
Cheers! You have unlocked those fascinating features and rooted Samsung Galaxy S22 without any problem. So, what are you waiting for, start flashing custom ROMs?
If you encounter any issue during any method or have some queries, let us know in the following comments section. Meanwhile, stay tuned for more rooting content.